Analog input device PAV - 3
Busbar coupler protection devices
Cabinets of relay protection and automation of series
Central annunciator units
Device of arc protection of the PDZ
Discrete input devices DDI
Discrete output devices DDO
Disposing device DSH
Electric motor protection devices
Fiber Optic DVO Sensor
Hardware and software system promSCADA
Input and output protection devices based on OCP
Input and output protection devices with directional earth fault protection
Input protection devices, busbar coupleres, outgoing lines and standby transformer protection
Input, output and standby protection devices for transformers
Line protection devices
Motor differencial protection devices of transformer
Power supply IP-01-MRZS
Section protection devices
Voltage monitoring devices and voltage protection kit
Voltage regulating devices for under load transformer
Disposing device DSH AIAR. 468243.002
The device is designed to bypass the trip coil of the circuit breaker and re-bypass it if it is necessary to turn off the circuit-breaker by short-circuit currents.
The rated current of the current circuit of the device is DSH - 5 A.
The number of bypass/re-bypass channels - 2 (phases A and C).
Range of bypass currents - from 1,5 to 150 A.
- at a current of 1.5 A - not less than 1 and not more than 560 Ohm,
- at a current of 50 A - not more than 20 Ohm,
- at a current of 150 A - not more than 7 Ohm.
- The maximum value of the current at which the technical characteristics of the device are provided is not more than:
- long 5 A
- within 5 minutes 8 A
- within 5 seconds 75 A
- within 1 second of 150 A.
Simplified connection diagram
Overall and connecting dimensions and recommended marking