Categories
Analog input device PAV - 3
ATS devices in networks 0.4 - 150 kV
Busbar coupler protection devices
Cabinets of relay protection and automation of series
Central annunciator units
Device discrete input/output DDIO
Device is intended for the reflection of the state of interconnect equipment
Device of arc protection of the PDZ
Devices for regulating the voltage of the transformer under load
Devices for the protection of the section
Discrete input devices DDI
Discrete output devices DDO
Disposing device DSH
Electric motor protection devices
Fiber Optic DVO Sensor
Hardware and software system promHMI
Input and output protection devices based on OCP
Input and output protection devices with directional earth fault protection
Input protection devices, busbar coupleres, outgoing lines and standby transformer protection
Input, output and standby protection devices for transformers
Line protection devices
Motor differencial protection devices of transformer
Power supply IP-02-MRZS
Voltage monitoring devices and voltage protection kit
Device ПАВ-3 AИAР.426449.003
The ПАВ-3 device is designed to measure the effective currents, voltages, power and convert to the Modbus RTU exchange protocol, and Ethernet interface (RJ-45) - IEC 60870-5 104 exchange protocol (optional).
Description
| Parameter | Range | Precision |
|---|---|---|
| The effective value of phase (A, B, C) currents, A | 0,2 – 100 | 4% |
| The effective value of phase (3I0) currents, A | 0,01 - 5 | 4% |
| Current values of linear (phase) voltage, V | 1-125 | ±5V |
| Full power, kVA | 0-9999 | 4% |
| Active power, kW | 0-9999 | 4% |
| Reactive power, kVAr | 0-9999 | 4% |
| Power factor | -1 ... 1 | 4% |
| Rated current TT, A | 20-800 | |
| Supply voltage AC (DC), V | 90-264 (125-370) |
WisiNet2 Setup Utility
Software Wisinet2 for МРЗС-05Л, МРЗС-05Д, MRZS
This manual is written only for Updating the program WiziNet 2
software WisiNet_2_user manual
Contact Us