MRZS-R

Performs the following functions

Control and measurement

• line voltage of the main channel from TV1;
• line voltage of auxiliary channel from TV2 installed on another section of the bus, powered by this transformer;
• current from the current transformers of one of the phases of connection, the load of which provides current compensation - main channel;
• current from the current transformers of one of the phases of another connection, by the load of which current compensation can be made - auxiliary channel.

Automation functions:

• automatic regulation of the voltage of the power transformer under load for monitoring the voltage level from the main input (ТV1);
• control by additional input (ТV2) voltage on another section of the bus, powered by this transformer and limiting the regulation when the voltage goes beyond the limits set by the setpoint. Switching the inputs of controlled voltage sources (TV1 or TV2) as a reference on discrete input or operationally;
• ­ counterload voltage control by current of one of connections;
• ­ interlocking of the automatic control of the on-load tap-changer during overloading of the transformer by load current.

Relay protection functions:

• ­ protection from emergency modes, caused by improper operation of on-load tap changing;
• ­ under-voltage protection PVmin;
• ­ maximum voltage protection PVmax.

Monitoring, registration and alarm functions:

• ­monitoring and indication of on-load tap changing position;
• monitoring of the operation of on-load tap changing drive in all modes of its operation;
• control of on-load tap changing drive:
  ­
  • remote, through discrete inputs;
  • manual, using the buttons on the front panel of the device;
  • telecontrol via communication channels;
  • ­automatic;
• ­accounting of on-load tap changing drive resource;
• ­emergency recorder of actual values of analog signals:
­
• parameterizable duration of pre-emergency recording from 80 ms to 26 s;
• resolution of the recorder - from 80 to 800 ms;
• total duration of the recording - 30 000 samples,
• discrete signal recorder:
• 64 recent events;
• up to 80 records in each accident with a fixed value:
• maximum current of the main channel;
• ­maximum voltages of the main and auxiliary channels;
• ­minimum voltage of the main channel at the moment of PVmin set-up.

Enhanced logic functions:

• ­number of defined functions - 8;
• number of defined triggers - 4;
• status of triggers is stored in non-volatile memory;

Enhanced logic allows to complement existing functions, and create new ones.

Service functions:

• ­freely assignable inputs;
• ­freely assignable outputs;
• ­freely assignable LEDs;
• two groups of settings for all protections;
• multilingual menu - 3 languages supported;
• three freely programmable buttons;
• work with an external computer is carried out through the USB port.

Interfaces and communication protocols:

• ­Interface RS 485 - Communication protocol Modbus RTU;
• ­Interface USB;